Green Valley Landcon logoGreen ValleyLANDCON PVT. LTD.Send an enquiry
  1. Green Valley
  2. Products
  3. Rubber pyrolysis oil
Pyrolysis · Industrial fuel

Rubber pyrolysis oil

A high-calorific liquid fuel recovered from shredded rubber.

Rubber pyrolysis oil
Photo: Wikimedia Commons, CC0 (oil sample)

Rubber pyrolysis oil (TPO) is the main liquid product of our continuous pyrolysis plant. It is condensed from the vapour released when rubber is heated without oxygen, then settled and filtered before dispatch.

It is used as a furnace and boiler fuel in place of furnace oil or LDO, and as a feedstock for further refining. Because our plant runs continuously, the oil from one lot to the next is consistent in quality.

Typical uses

  • Boilers
  • Furnaces
  • Kilns
  • Refining feedstock

Specifications

PropertyTypical valueTest method
Density at 15 °C0.91 – 0.95 g/cm³ASTM D4052
Gross calorific value10,000 – 10,500 kcal/kgASTM D240
Kinematic viscosity at 40 °C3 – 10 cStASTM D445
Flash point (closed cup)30 – 60 °CASTM D93
Sulphur content0.8 – 1.5 %ASTM D4294
Water content< 1 %ASTM D95
Ash content< 0.1 %ASTM D482

Values are typical and may vary by lot. A certificate of analysis is supplied with every dispatch on request.